You can download the manual for each language you want here.
1 Image for example BlacHole 16.4 HDMI – Cec
1 USB with Swap 128 Megas
Uninstall ( If you have ) plugin E2 Free Memory
Place file attachament /etc ( attribute file = 644 )
The first thing you need to cardshare is a linux sat box , for this tutorial we will talk about a dreambox , a good place to start is with a dm500s you will need atleast a null modem cable ( to connect your dreambox to your pc ) and you will need to download some free software . the first thing is an image ( this is the tv software ) as a lot of deambox are clones i suggest downloading a clone safe image , nabilosat darkstar or evoluton are excellent images ,you also will need to download and install universal dreamup v220.127.116.11 ( this puts the image in to your dreambox ) and you will need to download and install dream control center ( dcc you need this to edit cccamn) also you could download either peazip or winrar ( some software comes in zipped form and needs to be unzipped ) i would also create a new file in my pc and call it dreambox and store all the software in there so you can find it easily.
In this tutorial I am going to show you how to put picons onto usb stick. This is 1 of a few ways of doing this and for me this is easier than unplugging usb plugging back in etc lol
For this you need a usb stick formatted as fat32 or ext3 and the usb to be mounted correctly in device manager as media/usb
You can check if this is the case by going to Menu/Setup/ViX/Devices Manager and should look like this below;
Necesary a USB Pendrive in FAT32 o Ext Format.
Insert pendrive in any USB slot receiver
In remote control press blue Button and again blue
In remote control press Red button Mounpoints
Here is a small guide to install new drivers Vu+
First make a backup copy of your current drivers, copy all the files in
Items you need before we start.
1. A suitable USB stick formatted to FAT32.
2. Image of your choice
3. Compression software such as 7zip.
4. HP Format tool ( not essential but highly recommended )
5. Teracopy ( again not essential but highly recommended )
6. A clean pair of underpants, just in case things go wrong.Continue Reading..
The following aims to show you in a easy to follow tutorial how to setup your ViX imaged receiver
for use with a Wifi stick. The tutorial was created for the ViX 3.xx series images and may not be
compatible with earlier images by the ViX image team.
Plug your WiFi dongle into one of the USB ports of your receiver and REBOOT (that’s FULL reboot
not just an Enigma reboot)Continue Reading..