Documents

You can setup your tuner to ways easy way is using usal setting on and if u are more have experience use tuning sat manually this way you can fine tune.

Now i am going to show you manual tuning satellite.

Press menu/setup/service searching/tuner configuration/select tuner B/Choose advanced and select the satellite you want to tune in in my case 28.2 select lnb1/select diseqc mode 1.2
Continue Reading..

Config diseqc Dish Motor Tuner

How to made Personal Backup and Full Backup

/ How To

How to made Personal Backup and Full Backup.

As follows:-

I } Personal Backup

1} Press Menu button @STB Remote Control , and info page will show {1}

backup Black Hole Full Backup Personal Backup

How to setup Universes in BH image

/ How To

How to setup Universes in BH image

As follow:-

1} To run/setup universes in BH image you must have mounted your usb to /universe because all the universe worlds are saved on your usb stick. The best way to do this is to make 2-3 partitions on your usb using the usb format wizard from the Blue panel, and mount 1 of the partitions as /universe. You can mount 1 of the other partions ase /media/usb (or whatever else you want to mount as) {1}

BH Black Hole mounted Universes usb

How to setup your Vu+ for recording on USB

/ How To

How to setup your Vu+ box for recording on an usb stick or on another device connected to an usb port.

Mount your usb stick by Devices Manager as /media/usb

Blue Panel > Black Hole Settings > Devices Manager > Mountpoints …

Black Hole how to Mountpoints recording usb VU+

How to Mount HDD and USB in the Black Hole Devices Manger

/ How To

How to Mount USB in the Black Hole Devices Manger

As follows :-

1} Press Blue button twice @STB Remote Control and select the Devices Manger, you will see this screen {1}

Black Hole HDD how to Mount usb

MeoBoot – Short user guide

/ How To

To use MeoBoot, obviously, you need to install a devices (HDD or USB Stick), to format it in EXT4 and to mount it.

You can format and mount the device by Black Hole Devices Manager.

After installing your device, you have to enable MoBoot by opening it by Black Hole Green Panel and choosing your preferred device to use for multiboot.