Category: How To

How To Load Or Setup CCcam Card Sharing On Skybox/Openbox S9 Using Remote Control

CLINE SETUP

1: Go into the main menu
2: Select Network, enable your network and set the IP address to DHCP. Go back to network.
3: Select “CCcam Client Setup” If you can not see CCcam setup in the menu jump to number 9
4: If you have a cccam.cfg on your usb, we provide the CCcam.cfg file, ask for the full configured file from us to get all of our channels. Copy the CCcam.cfg file into the root folder from your USB stick. Do not copy the file in a specific folder.Select ‘Update files by usb’ if not, jump to number 10

Continue Reading..

How to install tar.gz files from Black Hole image

Basic Note: for we install tar.gz files in Black Hole image we need rename file from tar.gz to bh.tgz

for my tutorial i will use Ipkg_Builder_bh.tgz

with my favorite ftp program i send file to tmp folder in my receiver after i’m going to remote control
and we press green/yellow button and we follow fotos step by step after any foto we press ok

screenshot.jpg Continue Reading..

How to organize your Black Hole Green Panel

Here is one guide for who to organize your Black Hole Green Panel with your most used plugins first in the plugins list​
1. Green button​
2. Red button (Panel Setup)​
screenshot.jpg

Continue Reading..

How to setup Crossepg {XEPGDB providers} on a USB stick

1} Press Menu on your STB Remote Control and choose SETUP {1}

1.JPG
2} Then select CrossEPG {2}
Continue Reading..

How to Format USB stick in Black Hole image

1} Press the Blue button twice @STB Remote Control, you will then see this menu{1}

1.JPG
2}Then Select Usb Format Wizard, press the Red button and then press Red again. You see info about connecting your USB stick [you will see step by step info, telling you what to do] {2}
Continue Reading..

How to install new Drivers on VU+

Here is a little guide to install new VuPlus drivers.
FOR OLD KERNEL
First of all make a backup copy of the current drivers, copy all the files in
/lib/modules/2.6.18-7.3/extra
When new drivers comes out, take tar.gz drivers file and unzip all files in
/lib/modules/2.6.18-7.3/extra
and replace old drivers.
Than reboot your decoder, that’s all.
If image reboots correctly new drivers are compatible with your image, if image doesn’t start it means that the drivers are not compatible and you have to wait for a image upgrade.
In this case to go back to old drivers, just connect with ftp and copy the drivers you backup before to:
/lib/modules/2.6.18-7.3/extra

Continue Reading..

How to transfer Files from PC to Receiver

First you need is FTP program like flash fxp, file zilla, dcc etc i am going to show u with dcc
1st open dcc on the firewall click allow for all networks then fill in with correct ip no , user name and password like the screenshot if entered correct info of your stp and pc you will see green line pc to your stpContinue Reading..

Senderlogos/picons im OLED-Display der Dreambox 800 SE

Du bist auf der Suche nach Senderlogos, sog. picons für Deine Dreambox 800 SE?

Wie geht’s und was brauchst Du dafür? Ganz einfach:Continue Reading..

SKY und die Dreambox – SKY Sender mit CAM freischalten

Was muss ich tun, um mit meiner Dreambox die SKY Sender und Kanäle zu empfangen?

Kann ich meine SKY-Kanäle auch auf der Dreambox anschauen?

SKY Empfangsprobleme mit OSCAM und der Dreambox?

Continue Reading..